TECHNICAL INFORMATION:
CONSTRUCTION:
Main body compacting ram of the compactor is made up of rectangular steel of 6mm thick. The faces of the compacting ram are made from 20 mm thick plate.
Inside of the compactor is painted with primer. All parts outside the compactor are painted with Hammer grey paint or any another color according to the client’s requirement.
ELECTRICAL PANEL:
All electrical components are housed in easily accessible keyed cabinet which can be mounted either side of the compactor or remotely at request. Equipped with semi programmable logic controller for safety of the compactor and complex interlock.
A. Panel Class: IP65
B. Equipped with two modes manual or auto
In manual mode all hydraulic components can be operated separately. In case of Auto mode faults. By using push button mounted in the panel face
In Auto mode using photocell to start compactor operation. The photocells are protected against foreign material stack to them by using steel cover fixed inside the compactors hopper.
A. Oil temperature shut down switch with indication lamp ( oil high temperature )
B. Motor trip lamp in case motor overload.
C. Equipped with fan for cooling electrical components inside the panel.
D. All electrical components are labeled inside and outside the panel for easy repairing and faultfinding.
E. Incase of stacking of the pressing cylinder or any reason the system will be stopped or gate cylinder automatically after preset time.
HYDRAULIC SYSTEM:
CONSISTS OF TWO PARTS
Hydraulic Cylinders: One main pressing cylinder designed for easily installing and dismantling.
The other cylinder for opening the gate.
Power Pack:Equipped with all required components from Gear Pump, Suction, Filters, Solenoid valves, Relief valve, Pressure Gauge and Pressure Switch
Electrical motors: .5KW, 3Phase, 380 Volts, 50Hz, 1460 rpm / Or 1.5KW, 1Phase, 220 Volts, 50/60Hz, 1460 rpm
Compacting capacity: 10 ton
The tank is equipped with high oil temperature switch to stop the system in case of oil high temperature.
DIMENSIONS:
A. Refer to attached drawing
B. Weight ~600 kg
